| Have you ever seen a large, full color logo on the side of vehicle? You know that it is too intricate to be multi layer applied vinyl. It’s basically a decal that has been printed with outdoor inks on white vinyl with a digital printer. Once printed onto the vinyl, the digitally printed shapes need to be cut out of the vinyl with a cutter. But the cutter needs someone way of knowing how to cut around the printed portion of the vinyl. Here is where the registration eye, or laser, comes into play with our contour cutters. The eye or laser registers at the edges of the printed portion of the vinyl allowing the software to know where to start and stop cutting. To contour cut with our US Cutter Laserpoint, you will need to print to your digital printer with the software bundled with the US Cutter Laserpoint, and then cut the preprinted vinyl using the same software. Our Graphtec series have more advanced contour cutting features allowing for greater tolerances and to cut and print with almost any design software. Contour cutting allows you to expand your product line as your capabilities are increased to create decals, full color t shirts, and vehicle wraps, just to name a few. |
