Graphtec 4210 Series Compact Flatbed With Standard RMS

0 item(s) / Total: $0.00

Home > Vinyl Cutters > Flatbed Cutters

Graphtec 4210 Series Compact Flatbed With Standard RMS
Item Id: GRCFC4210-60

Email this page to a friend

Retail Price: $10,195.00

Your Savings: $890.00

Your Price:

$9,305.00

Quantity

Description

Graphtec 4210 Series Compact Flatbed With Standard RMS

The FC4210-60 cutting plotter is a tabletop or floor standing (option) intermediate-format flatbed cutting plotters capable of processing various material with accuracy compliant to most industry requirements for pattern making.

With a maximum cutting force of 600g, the FC4200 series provides economical solutions for cutting thick, hard materials that cannot be processed with a friction-feed cutting plotter.

The FC4210-60 comes with a standard RMS (registartion mark sensor) for contour cutting of pre-printed graphics.

• Cutting Force up to 600 grams
• Create Sample Packaging from F/G grade microflute and paperboard
• 2-Tool Holder for Cutting and Creasing
• Reads Registration Marks generated from Adobe Illustrator©
• Digital Servo Motor
• Effective Cutting Area of up to 33.8"x23.6"
• Max Cutting Speed of up to 23.6" per second

Specifications
Configuration: Flatbed
Drive: Digital servo system
Effective cutting area 860 x 600 mm
Maximum loadable substrate width: 666 mm
Substrate hold-down surface: Adhesive mat or adhesive sheet
Maximum cutting speed: 65 cm/second
Settable cutting speeds: 1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65 cm/second
Cutting force: 0.098 to 5.88 N (10 to 600 gf)
Mechanical resolution: 0.005 mm
Programmable resolution: GP-GL: 0.1, 0.05, 0.025, 0.01 mm (menu-selectable);
HP-GLTM*1: 0.025 mm (fixed)
Repeatability: Within 0.1 mm*2
Distance accuracy: Within ±0.2% of the distance moved or ±0.1 mm, whichever is greater*2
Perpendicularity: Within 0.4 mm/610 mm
Registration mark reading accuracy: Within 0.2 mm*3
Sensor front/reverse position: Within 0.2 mm*2
alignment accuracy
Number of cutters/tools/pens: Two
Cutter blade, tool, and pen types Cutter blade: supersteel
Creasing/scoring tool
Pens: Water-based ballpoint, oil-based ballpoint
Substrate types: Paperboard up to 0.5 mm thick
Microflute board (F/G grades)
Clear sheets for plastic boxes
Marking film (self-adhesive, fluorescent, and reflective vinyl)
Stiff paper/card (for stencils, etc.) up to 0.5 mm thick*4
Interfaces:RS-232C serial and Centronics parallel (auto interface recognition)
Buffer capacity: 2 MB
Command sets: GP-GL and HP-GLTM emulation (control panel-selectable)
LCD display 20 characters x 2 rows
Power requirements: 100 to 120 VAC ±10%, 50/60 Hz; 220 to 240 VAC ±10%, 50/60 Hz
Power consumption: Within 120 VA
Operating environment: +10 to +35°C, 35 to 75% RH (non-condensing)
External dimensions (mm):, approx. 1172 (W) x 960 (D) x 200 (H)
Weight :(approx.) 27 kg