|
Graphtec Craft ROBO Pro
- Combine with your desktop printer (up to A3) for large-format or multiple custom apparel graphics, stickers, decals, contour die-cuts, 3D models & packaging designs.
- Fast & accurate professional cutting plotter of vinyl, film, card stock, foil, heat and image transfer media. Comes standard with Graphtec’s Registration Mark Sensor.
- Includes standalone software (ROBO Master Pro design software) plus Cutting Master 2 Plug-in for use with Adobe Illustrator® and CorelDraw®.
 Ultimate Hobbyist Desktop Cutter
Craft ROBO Pro is a desktop sized
cutting plotter ideal for serious hobbyists, as well as professionals looking
for a compact and portable solution. The Craft ROBO Pro is the professional
desktop model of Graphtec's CE5000 series of cutting plotters. The Craft ROBO
Pro has a maximum cutting width of 14.8 inches, maximum speed up to 16 inches
per second, and cutting force up to 300gƒ.
Cuts Assortment of Media
Craft ROBO Pro is perfect for all
kinds of media cutting applications including vinyl, heat and image transfers,
contour cut (die cut) stickers, labels, wrappers, gift/hang tags, scrapbooking,
package design mock-ups, architectural & educational 3D modeling, stencil
cutting for paint, sandblast & etching masking plus more.
Compact Size
Craft ROBO Pro is a professional 15
inch cutting plotter that is compact, portable and affordable for designers,
crafters and hobbyists.
Many Different Applications
The Craft ROBO Pro cutting plotter is
ideal for decorative media and heat transfer applications, personalized gift
packaging, graphic design packaging mock-up, card making and many more
products. With Craft ROBO Pro, you can produce high quality, custom apparel
graphics and personalized gifts with minimal investment. Use Craft ROBO Pro in your studio to produce packaging samples, custom
one-off or short run print and cut (die cut) labels, stickers and full-color
T-shirt heat transfers!
 Automatic Registration Mark
Sensor
Craft ROBO Pro includes Graphtec's
exclusive Automatic Registration Mark
Sensor, which enables the cutter to detect registration marks printed on
many kinds of media, then automatically contour cut (die cut) around the
printed image. This ensures fast and accurate professional cutting plotter of vinyl, film, card stock, foil, heat and image transfer media.
Control Panel
The built-in control panel and LCD
menu display allows quick access to advanced settings and controls. The cutting
speed, force, and offset value can be pre-programmed for each of the materials
you cut.
Craft ROBO Pro System Requirements &
Included Software
Craft ROBO Pro includes a design
program called ROBO Master Pro (Windows Vista and earlier) and Cutting Master 2
(a Plug-in for Adobe Illustrator 8 through CS4 for Windows; Illustrator 10 -
Illustrator CS4 on Mac *). Users can download a free update of Cutting Master 2
from CraftROBOstore.com by GRAPHTEC America.
*Mac users must have a complete
version of Adobe Illustrator to use the Craft ROBO Pro. Graphtec America
provides the free plug-in to Adobe Illustrator. Support & Downloads also
available @ www.graphtecamerica.com/support
Minimum
System Requirements (Windows)
- Windows Operating System: Windows
2000/Windows XP/Vista
- CPU: Pentium III 600 MHz or higher
- Memory: 128 MB or more (at least 256
MB recommended)
- Monitor: 1024 x 768 High color (True
Color recommended)
- USB Port (2.0)
- Mouse
- CD-ROM drive
- Supported cutter: Craft ROBO Pro
(firmware CE3000-CRP Ver. 7.00 or later, connected via the USB interface)
- Supported printers: Windows-compatible
printers
- Note: When importing DXF files, the
following DXF objects can be loaded into ROBO Master Pro: Lines, polylines,
splines, circles, arcs, and ellipses. Block-referenced objects or splines,
text, and dimension lines cannot be loaded.
Minimum
System Requirements (Mac)
- Macintosh Operating System: OS 8.6 ~ 9.2.2, OS
X 10.2.8 ~ 10.5 Leopard
- CPU: PowerPC G3/G4/G5 & Intel
Based Processors.
- Memory: 128 MB or more (at least 256
MB recommended)
- Monitor: 1024 x 768 High color (True
Color recommended)
- USB Port (2.0)
- Mouse
- CD-ROM drive
- Support Application: Adobe Illustrator
version 10 through CS4 (w/ appropriate Mac OS version)
- Supported Plotters: Craft ROBO Pro and
other Graphtec CE series, FC series plotters.
- Supported printers: Mac OS compatible
printers
Craft ROBO Pro Specifications
PARAMETER
|
SPECIFICATION
|
|
CPU
|
32-bit
|
|
Media
Feed Configuration
|
Grit
rollers, Sheet or Roll Media (roll supports included)
|
|
Drive
system
|
Digital
Servo Motor
|
|
Compatible
Media widths
|
Min:
1.968 inches (50mm) Max: 19.055 inches (484mm)
|
|
Maximum
cutting area
|
14.76
inches wide by 164.04 feet long (375mm x 50M)
|
|
Range
of guaranteed precision
|
14.015
x 78.74 inches (356mm x 2M) *1
|
|
Carrier
Sheet
|
Super
A3 size: 13 x 19 inches
|
|
Maximum
media thickness
|
.25mm
|
|
Maximum
cutting speed (all directions)
|
23.62
ips (60 cm/s)
|
|
Maximum
Acceleration (45° Angle)
|
16.4
ft/sec^2 (5 m /sec^2)
|
|
Selectable
Cutting Speeds
|
1–10,
15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s
|
|
Cutting
Force (31 levels)
|
20
gf to 300 gf
|
|
Minimum
Character size
|
0.196
inches (5mm) for Alphanumeric characters
(varies depending on the media, font style, etc.)
|
|
Mechanical
resolution
|
0.000196
inches (0.005 mm)
|
|
Programmable
resolution
|
GP-GL:
254/508/1016/2540 ppi
HP-GL™ *emulation: 1016 ppi
|
|
Repeatability
precision
|
0.1
mm or less per 2M *1
|
|
Number
of Pens or Blades Mountable
|
1
pen or Blade Holder at a time
|
|
Blade
Type
|
Tungsten
Carbide blade, 0.9mm to 1.5mm (see Accy List.)
|
|
Compatible
Plotting Pen Type
|
Water-based
fiber-tip pens
|
|
Compatible
Media
|
Sheet
or Roll media including marking films (PVC, fluorescent, or reflective
film)
up to0.25 mm in thickness. Heat and image transfer papers with backing,
craft paper
with backing, card stock, polypro, kent paper, decorative media and
papers with use of carrier sheet. (excluding high-intensity reflective
film)
|
|
Control
Interface (selectable)
|
USB
2.0 / RS-232C / Centronics Parallel
|
|
Interface
Buffer capacity
|
2
MB
|
|
Command
modes (Selectable)
|
GP-GL,
HP-GL*2
|
|
Display
Panel
|
Liquid
Crystal Display (16 characters x 1 row)
|
|
Power
Supply Rating
|
100~120VAC
200~240VAC 50/60 Hz
|
|
Power
Consumption
|
100
VA
|
|
Max.
Operating Environment
|
50°
F to 95° F (10°C to 35°C)
|
|
Recommended
Environment
|
60°
F to 89.6° F (16°C to 32°C)
|
|
Relative
Humidity
|
(35%
to 75% RH non-condensing)
|
|
External
Dimensions (W x D x H)
|
24.53
x 11.22 x 8.78 inches (623 x 285 x 223mm)
|
|
Unit
Weight
|
20.72
Lbs (9.4 kg)
|
|
*1:
Depends on type of approved media and cutting conditions
*2: HP-GL is a registered trademark of Hewlett-Packard Company
|
|
|
|
User's Manual Downloads:
For details on setting and operating the Craft ROBO Pro cutting plotter, please refer to the User's Manuals above.
|
